An empty indoor bouldering wall with varied blue, orange, green and purple holds above clear landing mats.

Climbing Hold Types: Shapes, Names and Direction

Approximate reading time: 14 minutes.

Quick Answer: Jugs, edges, slopers, pinches and pockets describe familiar climbing hold features. Sidepulls and underclings describe how a contact is used, while crimp can refer to a small edge or a hand position. Learn the name, then consider orientation, feet and local rules. A label alone does not prescribe the move.

Someone calls the next hold a pinch. Another climber describes using it as a sidepull. A coach asks you to notice its edge. Those descriptions may all concern the same object rather than three different holds.

Climbing vocabulary mixes the shape of a surface, the direction in which it is used and the arrangement of the hand. Separating those ideas makes conversations clearer. It also stops a beginner from treating every new word as an instruction to pull harder or adopt one compulsory grip.

This is an indoor-climbing vocabulary guide, not a finger-strength program, injury guide or complete movement tutorial. Ask your facility for an induction and suitable instruction. Recognizing a term does not establish that a particular hold, movement or exercise is appropriate for you.

Separate shape, direction and hand position

The first question is what the contact looks like: deep and concave, narrow and shelf-like, broadly rounded, recessed or shaped with opposing sides. The second is how it is being used in the movement. The third is what the hand is doing. These questions overlap, but they are not interchangeable.

The British Mountaineering Council's climbing glossary mixes useful shape and movement terms, including buckets, crimps, pinches and undercuts. It also notes that a larger hold can be crimped. That last point matters: the shape's name does not uniquely determine the hand position.

A more precise conversation

“The green one” may identify an object, but not what is confusing you about it. “The green hold has a narrow edge facing sideways; what does sidepull mean here?” gives an instructor something specific to explain. You have described what you see without claiming to know the correct movement.

You do not need specialist language for every sentence. “The rounded hold above the start” can be perfectly clear. The value of a technical word is that it improves communication, not that it proves experience or replaces a demonstration.

Graphic separating three questions about a climbing contact: shape, direction and hand position.
Ask which kind of information the word provides before treating it as an instruction.

Recognize the main hold shapes

REI's climbing-hold guide describes jugs, edges, slopers and pockets, alongside directional uses. These are helpful categories for recognizing features, not rigid boxes into which every indoor hold must fit. A shaped hold can offer more than one usable surface.

Name Feature the word usually highlights Useful clarification
Jug or bucket A generous, positive gripping feature, often with a deep lip or recess. The name does not guarantee an easy move or rest.
Edge or ledge A shelf-like contact that may vary greatly in depth and length. An edge can face different directions.
Sloper A rounded or sloping contact without an obvious positive gripping lip. Its usefulness depends on more than apparent size.
Pinch A feature usable with the thumb opposing the fingers. The same object may also offer an edge or another contact.
Pocket A hole or recessed opening. The label is not a prescription for which fingers to use.
Crimp Often shorthand for a small edge. The same word is also used for a hand position.

Jug or bucket: a generous feature, not an easy-climb guarantee

A jug usually offers a positive feature that is relatively straightforward to recognize. Bucket is a common related name. The depth or lip is more informative than the hold's overall silhouette: a large object is not automatically a jug, and a smaller object can still have a positive gripping feature.

Do not confuse a comfortable-looking contact with an easy sequence. The next move, wall angle, available feet and reach still matter. A jug may be useful in a rest position, but the word does not promise that you can release a hand or comfortably pause wherever it appears.

Edge or ledge: describe the shelf before choosing a grip

An edge is a shelf-like feature rather than a fixed size. REI's explanation spans tiny edges and much larger ledges. For ordinary conversation, add a description such as shallow, broad, rounded or side-facing when that distinction matters.

“Edge” does not itself tell someone exactly how to arrange their fingers. It also does not tell them which direction makes the feature useful. A horizontal-looking shelf and a similar feature rotated sideways can pose different movement questions without becoming entirely different pieces of material.

Sloper: rounded does not mean featureless

A sloper generally lacks the obvious positive lip associated with a jug. Some rounded holds have subtle changes in shape or smaller features, so the broad label does not describe every part of the surface. Appearance alone cannot establish how a contact will feel.

Avoid turning “sloper” into “use more chalk,” “squeeze harder” or a universal body-position command. It identifies a kind of contact to understand with instruction. If you want the movement lesson, ask a coach to explain a suitable example rather than assuming every rounded hold presents the same task.

Pinch: opposing contact, not one exclusive shape

A pinch uses the thumb in opposition to the fingers. Many indoor holds visibly offer opposing sides, but the useful contact need not belong to a single, standardized pinch shape. Canada's Gripped discussion of common gym holds notes that holds described as crimps or slopers may also be usable as pinches.

The vocabulary lesson is that one hold can support more than one description. It is not an instruction to squeeze every hold as hard as possible or a promise that a particular hand arrangement suits everyone. Hand size and the actual feature are reasons to ask a more specific question, not reasons to force a label to fit.

Pocket: an opening, not a finger-loading plan

A pocket is a hole or recessed opening, with considerable variation in depth, shape and size. The name tells you something about the feature. It does not supply an appropriate finger selection, loading level or training progression.

You do not need to hang from a small pocket to learn the word. Ask for an explanation or a suitable demonstration in an appropriate teaching area. This guide intentionally does not reproduce finger-by-finger pocket instructions or convert a vocabulary lesson into a finger-strength exercise.

Illustrative blue concave hold, orange rounded hold, shallow purple edge and protruding green hold on a pale wall.
Contrasting shapes help explain the vocabulary. This generated illustration is not a test of grip, hold security or difficulty.

Understand directional names

A sidepull or an undercling describes use rather than a separate material or guaranteed shape. The same edge-like feature may invite different descriptions depending on its orientation and the movement being discussed.

The BMC route-reading guide explicitly considers hold type, direction and body position together. Apply that distinction when learning the names, without turning it into a rule that the closest hand must always take the closest hold.

Sidepull

A sidepull involves using a contact in a sideways direction. The feature may look like an edge, a positive hold or another shape. Calling it a sidepull helps explain the movement relationship; it does not establish a particular hand, stance or complete sequence by itself.

If two climbers describe the same object differently, ask whether they mean its shape or how they used it. “A rounded hold used as a sidepull” may be a clearer sentence than insisting that it must be either a sloper or a sidepull, but never both.

Undercling or undercut

Undercling and undercut are related terms for using the underside of a contact, pulling upward rather than simply down on a top-facing surface. REI uses undercling; the BMC glossary uses undercut. Recognizing both words helps when reading resources or listening to different climbers.

The word is not a universal instruction to move the feet to one height or put every climber into the same body position. Those are movement-teaching questions. Ask for an appropriate example if the explanation is not clear from the ground.

Gaston

Gaston is another movement term you may hear. The BMC glossary uses the image of opening lift doors to explain the outward action. It is not the name of one mandatory hold shape and is not synonymous with every sidepull.

You can understand the term without immediately trying a difficult version. A coach can show the distinction in a suitable teaching context. There is no need to turn an unfamiliar name into an aggressive shoulder position or imitate an advanced climber's attempt.

A climber uses differently oriented contacts on a low overhanging indoor wall with both feet on holds.
Orientation and the rest of the movement matter alongside shape. The scene is illustrative, not a hand-placement diagram.

Why crimp can mean two things

In everyday gym conversation, someone may call a small edge “a crimp.” They may also say that a person is crimping a hold. The first use describes the feature; the second describes a hand position. That overlap explains much of the confusion.

The BMC glossary describes crimping in terms of bent fingers and notes that larger holds can also be crimped. Knowing that distinction is enough for this vocabulary guide. It does not require learning a prescribed joint angle or applying a specific thumb position from a photograph.

Phrase you hear Likely meaning Clarifying question
“The next hold is a crimp.” The speaker probably means a small edge. Which surface or edge do you mean?
“They crimped that hold.” The speaker means a hand position or action. Are you describing the grip rather than the shape?
“That sloper can be pinched.” The object offers more than one possible contact. Which opposing surfaces are being described?
“Use the edge as a sidepull.” A shape and a directional use are being combined. What does the direction mean in this example?

Vocabulary is not a training prescription

Open hand, half crimp and full crimp are grip-position terms, not three grades of climbing hold. A terminology guide cannot decide which loading or progression is appropriate for you. Do not use this article to start maximal hangs, campus work or pocket training.

If a contact causes pain or feels unsuitable, do not use the label as a reason to persist. Seek appropriate individual guidance. The aim here is to improve the question you ask, not diagnose a limitation or prescribe a correction.

Where volumes and footholds fit

A volume is generally a larger three-dimensional feature that changes the geometry of the wall. It can offer surfaces of its own, and smaller holds may be attached to it. Germany's Bergfreunde hold-shape guide includes volumes alongside familiar hold categories, while distinguishing their larger structural role.

Check whether the feature belongs to your climb

Do not turn a general description into permission to use every feature in every facility. Bouldering Project describes its own volumes as usable for hands or feet with any circuit colour. That explains its system, not every gym's or event's rules. Ask staff how your facility treats volumes, starts, finishes and other marked features.

A foothold is a role as well as a recognizable object

Small holds are often used for feet, but size alone does not establish every permitted or useful contact. A larger hold may also offer foot options. Separate the movement question from the facility's rules about which features belong to the climb.

For detailed placement and weight-transfer work, use the existing beginner footwork guide and edging-versus-smearing guide. This article explains the vocabulary rather than repeating those movement drills.

Describe a hold clearly

Start with its location, then add the shape or surface you mean. Include orientation if that is the question. If you are uncertain, say so. “The orange rounded hold above the start, with the flatter patch on its left” is more useful than assigning a confident name that your listener interprets differently.

Learn names without interrupting a climb

Ask staff where it is appropriate to discuss examples. Stay out of active climbing and landing areas and do not turn a vocabulary conversation into touching holds on an occupied problem. Bouldering Project's etiquette guidance emphasizes clear fall zones and avoiding crossing another climber's path.

Ask whether another climber wants advice before providing it. You may want a definition while they want to solve the movement without beta. A simple question about a word should not become an unsolicited explanation of their whole sequence.

A coach and learner discuss a large green hold while standing at an unused low wall.
An appropriate teaching area lets you clarify a term without interrupting someone else's attempt.

Keep the description separate from the solution

Recognizing an edge is not the same as knowing the best sequence. If you want to connect the vocabulary to planning, continue with reading a bouldering problem. For understanding difficulty labels rather than hold names, see climbing grades in context.

Graphic suggesting shape, orientation, foot options and local rules as useful details when describing a climbing contact.
A clearer description can be more helpful than a more technical-sounding name.

Untangle common misunderstandings

Assumption Why it can mislead Better question
A large hold must be a jug. Overall size does not establish a positive gripping feature. What does the contact surface offer?
A small edge demands one grip position. Shape and hand position are different descriptions. What is suitable to learn here with instruction?
Sidepull is a separate shape. The word describes directional use. Which surface is being used sideways?
A hold name tells me the grade. The rest of the climb still matters. How does this contact fit the whole movement?
Every volume is automatically available. A local or event system may define use. What do this facility's instructions say?

Regional learning applications

The following sources provide useful vocabulary and local teaching examples. They do not establish one national technique or endorse this article's illustrations.

Region Learning emphasis Practical application
USA & Canada Recognizable shapes can have overlapping uses. Describe the surface rather than forcing one exclusive label.
UK Glossary terms mix shape, hand position and direction. Ask which meaning the speaker intends.
Europe, including DACH and Nordics Hold families and volumes appear in different languages and teaching contexts. Use examples to connect words, without assuming identical categories.
Oceania Local terminology and designated holds help explain the wall. Confirm the feature's purpose through the facility's own guidance.

USA and Canada: allow descriptions to overlap

REI's US hold guide separates familiar contact types, while Canada's Gripped article notes that a shape described one way may also be pinched. Apply that lesson by asking about the particular surface and use. This guide draws on those descriptive distinctions, not a universal instruction to swing between jugs or use one body position on every sloper.

UK: clarify the two meanings of crimp

The BMC glossary describes buckets, pinches, crimps, gastons and undercuts. In a UK wall conversation, ask whether “crimp” names a small edge or describes a hand position. Recognizing undercut alongside undercling also helps when moving between resources. None of those definitions replaces a suitable demonstration.

Europe, including DACH and the Nordics: connect words to examples

Germany's Bergfreunde guide uses names including Henkel, Leisten, Aufleger and Zangen alongside English terminology. The Norwegian Climbing Federation's route-setting course material likewise lists varied hold families and volumes. For a DACH or Nordic gym visit, ask for a physical example when translation is unclear. The Norwegian document is route-setter education, not permission to adjust, install or test holds yourself.

Oceania: distinguish a familiar name from a local function

Australia's Climb Fit glossary uses bucket and jug as related names. New Zealand's Boulder Co. beginner guidance identifies its grey down-arrow holds as downclimbing aids. Apply the combined lesson by learning both general vocabulary and the purpose of local markings. Do not assume that every grey hold in every Australian or New Zealand gym has that function.

Frequently asked questions

What are the main climbing hold types?

Common names include jugs, edges, slopers, pinches and pockets. Volumes describe larger three-dimensional wall features. Directional terms and grip-position terms add further information, rather than simply extending one list of shapes.

Are jugs and buckets the same thing?

They are commonly used as related terms for generous positive gripping features. Exact usage can vary in conversation, so ask for an example if the speaker's meaning is unclear.

Is a crimp a hold or a hand position?

It can mean either in ordinary climbing conversation. Someone may call a small edge a crimp or describe crimping a larger hold. Ask whether they mean the surface or the hand arrangement.

What is the difference between a sloper and a pinch?

Sloper highlights a rounded or sloping contact without an obvious positive lip. Pinch highlights opposing thumb-and-finger contact. A single object can offer features that make more than one description useful.

Are undercling and undercut different?

The terms are commonly related to using an underside contact by pulling upward. Resources may prefer one word. The term alone does not prescribe a complete body position or sequence.

Can I use any volume on a climb?

Follow the facility or event's instructions. A rule described by one gym should not be treated as universal. Ask staff about volumes, markings and permitted features before assuming.

Does a small hold mean a harder climb?

Not by itself. Hold size is only one feature of a movement and sequence. The name or appearance does not establish a grade, suitability or the effort you will experience.

Should I practise hanging on each type to learn the names?

No. You can learn the vocabulary through suitable explanations and demonstrations. This is not a hangboard or finger-loading program. Use appropriate instruction rather than testing small contacts merely to identify them.

Use the name to ask a better question

Good vocabulary helps you describe what you see and understand what someone means. Keep shape, direction and hand position separate, recognize that categories can overlap and ask about local rules. The goal is clearer learning, not memorizing a compulsory grip for every object on the wall.

Image disclosure: the hero, hold-shape close-up, climbing and coaching scenes, and educational graphics are AI-generated illustrations. The separate N23 photograph is an original product image. Illustrations do not establish hold security, difficulty, product testing or appropriate individual technique.

By T-K

返回博客

发表评论

请注意,评论必须在发布之前获得批准。