Reading time: about 11 minutes
Quick Answer: In everyday route climbing, an onsight is a clean first lead without prior move information or rehearsal. A flash is a clean first try with beta but no rehearsal. A redpoint follows previous attempts or practice. Bouldering usage, logging systems and competition formats need extra context.
Someone says they flashed a climb. Someone else says they redpointed it. Both reached the end, but their words tell different stories about what happened before that successful attempt. Understanding the distinction makes conversations, training notes and climbing reports easier to follow.
These are descriptions, not a ranking of people. Solving a climb over several sessions can be the point of the experience. Receiving useful beta can be enjoyable. Choosing not to hear the sequence can also be enjoyable. The useful habit is to describe your own attempt accurately without turning somebody else’s preferred approach into a lesser achievement.
Onsight vs flash vs redpoint
The BMC’s outdoor sport-climbing guide provides a useful starting point: onsight concerns a successful first lead without prior move knowledge, flash allows beta on that first try, and redpoint follows a previous attempt. In this route-climbing context, a clean ascent means completing the climb without falls or resting on the rope, rather than reaching the top with those interruptions.
| Term | Attempt history | Prior information | What the label does not tell you |
|---|---|---|---|
| Onsight | Successful first lead, without prior rehearsal | No prior move beta; ordinary ground observation is not automatically rehearsal | The grade, how hard it felt, or whether the climb suits your strengths |
| Flash | Successful first try, without rehearsing the moves beforehand | May include watching someone or discussing the sequence | That every move was obvious or that the attempt required little effort |
| Redpoint | Clean lead after a previous attempt or practice | Prior knowledge and rehearsal may be involved | How many attempts it took or how long the project lasted |
Onsight: your first encounter with the movement
An onsight is not simply a climb you have never completed. It also concerns the information and experience you brought to the first attempt. Watching a detailed sequence video and then climbing a route first go is not the same information history as arriving without that beta.
At the same time, do not interpret “no prior information” so literally that looking at visible holds from the ground becomes forbidden. The Bergfreunde climbing glossary distinguishes ground observation from external information about the moves. Looking up and making your own plan differs from rehearsing sections or having someone explain the crux.
Details can still generate disagreement. If a distinction matters to a published claim or an event, describe the circumstances and check the relevant convention. For an ordinary session note, a plain explanation is often more useful than arguing about a tiny fragment of information.
Flash: first try, with useful information
A flash preserves the first-attempt element while allowing beta. You might have watched a partner, talked through a sequence or seen a video. You still have to execute the climb, and that successful attempt must actually be your first attempt rather than your first successful one.
The REI climbing glossary associates flashing with a first lead try using prior information. Canada’s Gripped explanation adds a useful boundary: rehearsing moves or previously climbing sections is not simply the same as receiving beta. A first lead after practicing on top-rope therefore needs a different description from a flash.
Redpoint: the successful attempt after earlier work
Redpointing does not require a months-long struggle. If you attempt a route, do not complete it cleanly, and later make a clean lead, that later success can be a redpoint. The distinction is the earlier attempt, not whether the story is dramatic enough.
Gripped makes this explicit by discussing the second attempt as well as much later attempts. Do not erase an earlier try just because it was brief, happened last week or ended before the difficult section. Equally, do not treat a redpoint as a failed onsight. It is a description of a different ascent history.

What counts as beta, and when should you share it?
Beta is information about how to climb something. It can include which hold is useful, how a sequence connects or which body position worked for another person. A grade or route name is not the same thing as a detailed movement solution, but the boundary around particular bits of information can vary.
Watching a climber use a hidden foothold supplies information you did not discover yourself. Receiving a warning about unsafe conditions is a different priority. Never avoid necessary safety information, skip instruction or withhold a hazard warning to protect an ascent label. This article explains vocabulary, not rope systems, lead-climbing instruction or permission to attempt a route.
Ask before offering the solution
A simple “Would you like beta?” gives your partner a choice. If they say no, let them explore. If they say yes, explain what worked for you rather than presenting your sequence as the only possible solution. Different reach, movement preferences and strengths can make another approach reasonable.
If somebody starts explaining a climb you wanted to explore independently, a calm “I’d like to try it without sequence advice first” is enough. There is no need to turn the exchange into an argument. Clear communication helps everyone enjoy the session.

Separate observation from rehearsal
Studying a visible line from the ground, watching somebody perform the sequence and physically trying the holds are not interchangeable experiences. That distinction is why “I had never led it before” does not settle whether a later ascent was an onsight or flash. Prior top-rope work or section practice belongs in the history too.
For the skill of making your own plan, see our bouldering route-reading guide. Learning to preview a problem and choosing an ascent label are related subjects, but the first is a practice skill and the second is a description of what happened.
Which label fits these common situations?
| Situation | Useful description | Reason |
|---|---|---|
| You complete a route cleanly on your first lead with no prior move beta or rehearsal. | Onsight, within the relevant route-climbing convention | The first-attempt and information conditions are both relevant. |
| You watch a partner and then complete your first attempt cleanly. | Flash | It is still first try, but not without beta. |
| You fall on the first lead, then later complete a clean lead. | Redpoint | Second go is enough; a long project is not required. |
| You practiced sections on top-rope, then made your first clean lead. | Redpoint after top-rope practice | First lead does not mean no previous rehearsal. |
| You complete a familiar route first try today. | Repeat, with a note that it was first go this session | A new day does not reset the route’s history. |
| You reach the top after resting on the rope. | Worked or completed with rests; record the detail | Reaching the end is not the clean ascent these labels describe. |
| You climb a boulder first try after watching others. | Flash, subject to the venue’s completion rules | Bouldering uses first-attempt language too, without a lead-rope requirement. |
These examples are Castiron’s practical applications of the cited definitions, not endorsements of Castiron products by those publishers. Unusual circumstances deserve a note rather than a forced checkbox.
What about preplaced quickdraws?
Do not automatically reject a sport-climbing onsight or redpoint solely because quickdraws were already in place. The BMC’s specific outdoor sport-climbing guide does not make preplaced draws an automatic disqualification. Historical terms and local traditions can complicate the discussion, so describe meaningful details when they matter. This is not a reason to alter equipment arrangements without qualified instruction.
Bouldering language is not always identical
Bouldering commonly uses “flash” for completing a problem on the first attempt and “send” for successful completion more generally. The debate around “onsight” in bouldering is less settled. Gripped’s discussion of bouldering onsights illustrates why a word that seems straightforward in a route report can lead to different interpretations at the mats.
You do not need to settle the entire debate to keep an honest log. “First attempt, no watched attempts” or “sent on attempt four after watching a partner” communicates something useful. If your app provides only particular tick categories, use its guidance and keep the missing detail in the note.

A competition format is not the same as an individual ascent result
An event described as “onsight format” does not mean every competitor onsighted every climb. Likewise, a “flash format” does not mean every recorded result was a flash. Format language concerns the information and access arrangements for the competition; the climber’s outcome is a separate fact.
The Swedish Climbing Federation’s competition introduction discusses demonstration or video in flash formats and isolation in onsight formats. The Norwegian federation’s discipline overview also distinguishes formats across competition stages. Exact observation, attempt, timing and scoring rules belong to the relevant event. Do not copy a social-gym definition into a competition entry without reading its rules.
Keep a note that says what actually happened
A good note gives enough context to understand the result later. Record whether you were leading, top-roping, seconding or bouldering. Then add previous experience, any meaningful beta and whether the attempt was completed cleanly or used for practice.
The theCrag tick-type guide is useful for seeing how a logging platform distinguishes categories. Its treatment of categories, including repeats, belongs to its own system rather than a universal dictionary. If the available label and your normal vocabulary do not align perfectly, the written note is where you restore the context.
| Vague note | Clearer note | What it preserves |
|---|---|---|
| First go! | First go today; climbed last month too. | Session success without implying a first-ever attempt |
| Nearly sent. | Worked middle section; rested twice; no clean completion. | Progress without claiming the full ascent |
| Flash? | First boulder attempt completed after watching a partner. | Attempt history and prior information |
| New lead. | Clean lead after previous top-rope practice. | Mode and rehearsal history |
| Did it again. | Clean repeat using a different sequence. | A worthwhile improvement on a familiar climb |

Do not let the label replace the learning
A first-try result and a practiced result answer different questions. One describes what happened with limited direct experience; the other may show what became possible after learning. Neither captures the whole session. You may have improved pacing, found a more controlled position or understood why an earlier sequence did not suit you.
For the movement side of that process, our guide to resting positions and pacing explores a different lesson. Keep observations about your climbing separate from the ascent category, so both remain meaningful.

Regional reading: apply the idea without inventing regional rules
USA and Canada: distinguish information from rehearsal
REI’s US glossary and Canada’s Gripped explanation both connect a flash with first-attempt success and prior information. Gripped’s discussion of previous section practice adds an important practical distinction. If your session involves watching a partner and then trying the route, record that beta. If you have physically practiced the route, do not treat a first lead as a completely unfamiliar attempt. This is an application of those sources, not a separate North American rule.
UK: second go can still be a redpoint
The BMC’s outdoor sport-climbing guide is particularly useful for a UK climber who assumes “redpoint” only describes a long-term project. Its previous-attempt distinction allows a simpler description: a clean lead after an earlier try is not a new onsight opportunity. Use that clarity in your own notes rather than making the result sound more complicated than it was.
Europe, including DACH and the Nordics: separate Rotpunkt from event format
The German-language Bergfreunde glossary helps connect Rotpunkt terminology with clean completion and explains the role of ground observation. Swedish and Norwegian federation resources add a different lesson about competition information formats. A DACH climbing report and a Nordic event notice may use related words for different purposes. Ask whether you are reading an ascent description or an event format before applying the term.
Oceania: first go means first go, not first go today
Australia’s 9 Degrees event guidance explicitly describes a flash as the first go ever, not the first try of a later session. Treat its scoring and completion requirements as event-specific rather than universal gym rules. In New Zealand, the New Zealand Alpine Club’s explanation of a high-level flash distinguishes sequence information from pre-rehearsal. Applied to an ordinary Australia or New Zealand session, those sources support an honest note about both your earlier attempts and what you knew beforehand.
| Region | Relevant reading | Use it for |
|---|---|---|
| USA & Canada | Climbing glossary; Ascent styles explained | First attempts, beta and prior practice |
| UK | Outdoor sport-climbing introduction | Route-climbing context and clean completion |
| Europe | German-language terminology; Competition introduction | Ground observation, Rotpunkt and format distinctions |
| Oceania | Event-specific flash guidance; Information versus rehearsal | First-ever attempts and prior knowledge |
Frequently asked questions
Is flashing better than redpointing?
They describe different ascent histories. A flash is first-attempt success with prior information allowed; a redpoint follows earlier attempts or rehearsal. Decide whether your goal is exploration, practice, completion or something else rather than treating the word as a complete assessment of your climbing.
Can I flash a climb after falling on it?
Not on a later attempt at the same climb under the ordinary first-attempt meaning. A new session does not remove the earlier attempt. Describe the eventual clean completion and the history honestly.
Does looking at the climb from the ground stop an onsight?
Not automatically. Making your own observations from the ground is different from rehearsing the moves or receiving a detailed solution. Unusual inspection situations and specific claims may require more explanation.
Can a redpoint happen on the second try?
Yes. The cited BMC and Gripped explanations do not require a long project. A clean lead after an earlier attempt can be a redpoint.
Is a first top-rope ascent an onsight?
Keep the climbing mode explicit. The route definitions discussed here center on leading. A clean first top-rope ascent is best described with that mode stated, rather than allowing a label to imply a lead that did not happen.
Are onsight and flash competition formats guarantees of first-try completion?
No. Format names describe arrangements such as information access, demonstration and isolation. Actual ascent results and scoring depend on what each climber does and the event’s rules.
What if the logging app uses the terms differently?
Read the platform’s category guidance, choose the appropriate available option and add a factual note. The purpose is an understandable record, not squeezing every circumstance into a word that hides important details.
Image disclosure: Editorial scenes and educational graphics were AI-generated for this article. The shoe-reference photograph in the equipment box is an original product image. Illustrations are not demonstrations of rope systems or substitutes for qualified climbing instruction.
By T-K